ABRASION TESTER
Abrasion Tester on rubber and elastomers DIN 4649

Abrasion resistance test
Designed to determine the abrasion resistance of a specimen by controlling its change of ...
A line for the control and the research on plastic matters and rubbers suitable for the characterization, test-piece preparation mechanical and physical tests and of ageing, thermal tests HDT/Vicat.
Abrasion Tester on rubber and elastomers DIN 4649
Abrasion resistance test
Designed to determine the abrasion resistance of a specimen by controlling its change of ...
FT F1
Fogging
FT-F1 fogging tester is designed for the fogging characteristics evaluation of volatile ...
Melt-Index
Raw material characterisation
The basic model of plastometers uses the gravimetric method. The heated material is ...
Extrusion Plastometer
Raw material characterisation
A-MeP allows the determination of the Melt Flow Rate, basic test to characterize ...
Extrusion Plastometer
Raw material characterisation
Automatic extrusion plastometer is a highly reliable instrument that can meet the most ...
Plastometer
Raw material characterisation
Extrusion Plastometer with automatic cutting for the determination of the hot fluidity ...
Melting Point determination
Raw material characterisation
The pulverized material is sealed between two glass slides and heated according to the ...
Density Gradient - 2 or 3 columns
Raw material characterisation
It allows the determination of the density of solid materials at a temperature of 23°C . ...
Flowmeters
Raw material characterisation
Bulk density apparatus are for the measurement and determination of the apparent density ...
Cure Time
Raw material characterisation
Determination of the setting transformation time of phenolic resins on a thermocontroller ...
Furnace for Carbon Black content determination
Raw material characterisation
Recent research has confirmed that the resistance to ultraviolet rays and the ...
Compression set ASTM D 395 method B
Deflection
Steel plates to stress the specimens with known thickness series (mm9.5 - mm 4.5) ...
Compression set ISO 815
Deflection
Steel plates to stress the specimens with known thickness series (mm9.38 - mm 4.72) ...
Notcher
Specimen preparation
Specimen are clamped and notched by the combination of the following movements: alternate ...
Pneumatic Die cutter
Specimen preparation
To obtain standardized specimens, the die cutter should be equipped with appropriate ...